Front external 'dump' pockets (2) W170mm (6¾") x D60mm (2⅜") x H230mm (9")
Capacity (each) 1.5 litres (0.05 feet³)
Rear zippered pocket W340mm (13⅜") x D Nominal x H230mm (9")
Insert W350mm (13¾") x D120mm (4¾") x H260mm (10¼")
Capacity 7.5 litres (0.26 feet³)
The first and most obvious feature of the Eventer, and the one that gives the bag its distinctive look, is the protective leather base. The lower quarter is covered in the same top grain leather we use in all our products. Carefully selected and treated before it is cut and worked into the desired shape, these large pieces give the Eventer its strength and structure whilst also helping to form the two front dump pockets. These pockets share a covering flap that is secured using our ClogBall and strap system, which is used both here and again for the main rain flap.
The side patches are made from the same thick leather as the base and provide an anchor point for the shoulder sling. Solid brass fittings are used throughout, and slides on the webbing allow you to adjust the shoulder sling length to your preferred carrying or working height. Whether low slung toolbox or a safe and secure travel companion the Eventer simply works.
Binding to finish off the flaps is cut from the same vegetable tanned hides used on all of our bags.
Across the top of the main flap, a sturdy reinforcement gives the woven web handle a firm response. Safely stitched into a wide leather strap across the back, the entire assembly forms part of the bags structural frame.
A removable padded insert and dividers can be used to section the inside of the bag for your camera or other gear: a full height and width divider is included so you can store your laptop or tablet within the protected interior. Removing the bag's insert turns the Eventer into a roomy briefcase or overnight bag. The twin zips on the main comparment add security. To complete the picture the Eventer also has a full width back pocket secured by a zip fastening which means it has convenient and accessible storage for passports, tickets, maps and documents.
SP50 Shoulder Pad,
Eventer Removable Insert,
Eventer Divider set which consists of 2 x Tall Vertical Dividers and 2 x Small Horizontal Dividers
Eventer Front Straps
(these are also available as additional or replacement items)